Filter
Top Products
To setthe video outputresolution
Press VIDEO FORMAT repeatedly to select the desired resolution. Note that the resolution differs depending oil the display device,
connecting jack and the source material as below.
Auto Automatically selects the 480i 480i
recommended resolution acceptable
12)ryour TV.
480i 480i 480i 480i
480p 480p 480p 480i
720p 720p BD:720p, DVD:480p .3 480i
1080i 1080i BD: 1080i. DVD:480p *'t 480i
1080p 1080p 480i 480i
Source Direct Output differs depending on source Output differs depending on source 480i
material*l material*2
, I Outputs in the same resolution and frequency as recorded on the disc.
1080/24p video signals fire not oulput from the COMPONENT VIDEO OUT jacks.
:_Outputs in Ihe resolulion of the original setting 1720p or 1080i) when the DVD is not copy guarded.
• If the picture is not clear, natural or to your satisfaction, try another resolution that suits the disc and your TV/projector. etc. For the details, refer also
to the instruction malmal supplied with the TV/projector. etc.
• 480i or 480p vide() signals may be output when you connect to the COMPONENT VIDEO OUT.jacks and play some copy-guarded BDs/DVDs. To
ei:tioy the HD quality resolution in this case. connect the display device to the HDMI OUT jack using an HDMI cord.
• Even when you select a setting other than "Auto." the player automatically ac!iusts the video signals if the TV cannot accept Ihe set resolution.
To output the 1080/24p video signals
A 1080/24p-compatible TV is required for this setting.
1 Set "24p Output" in "Video Setup" to "On" (page 45).
Press VIDEO FORMAT repeatedly to select "Auto" or "Source Direct."
If there is no picture, press VIDEO FORMAT repeatedly until the picture appears correctly.
46