Filter
Top Products
® Connectingto an SVIDEOinput jack
Connect using an S VIDEO cord (not supplied). You will enjoy
high quality images.
Connect this player to your TV monitor, proiector or AV
amplifier (receiver) using a video cord. Select one of the patterns
(_) through (_), according to the input jack on your TV monitor,
projector or AV amplifier (receiver).
In order to view 1080p progressive signals with a compatible
TV, projector, or monitor with an HDMI input jack, you must
select pattern (_). You can use pattern (_) to view 480p/720p
progressive signals or 1080i interlace signals on a compatible
device with component video input jacks.
@ Connecting to a video input jack
Connect the supplied video cord (yellow) to the yellow (video)
jack. Yon will enjoy standard quality images.
Blu-ray Disc player
to VIDEO OUT
_i_"-. : Signal flow
L _
TV, projector, or AV
amplifier (receiver)
Whenconnectingto a standard4:3 screenTV
Depending on the disc, the image may not fit your TV screen. To
change the aspect ratio, see page 45.
Blu-ray Disc player
to S VIDEO
S VIDEO cord (not supplied)
i_'.... :Signal flow
TV, projector, or AV
amplifier (receiver)
@ Connecting to component video
inputjacks (Y, Pe, PR)
Connect the component via the COMPONENT VIDE() ()LIT jacks
using a component video cord (not supplied) or three video cords
(not supplied) of the same kind and length. You will enjoy accurate
color reproduction and high quality images. You can also enjoy
higher quality pictures from 480p/720p progressive signals or 1080i
interlace signals, if your TV, projector or AV amplifier (receiver) is
compatible.
Blu-ray Disc player
VIDEO OUT
Do not connect a VCR. etc.. between your TV and the player. If you pass
tire player signals via tire VCR, you may not receive a clear image uu the
TV screen. If your TV has only one audiu/video input.jack, connect tire
player to this .jack.
VCR __
Blu-ray Disc player Connect
directly
:Signal flow
Component video
cord (not supplied)
TV, projector, or AV
amplifier (receiver)
10