Filter
Top Products
@ Connecting to an HDMI input jack
Use an HDMI cord to enjoy high quality digital pictures and
sound through the HDMI OUT jack. You will enjoy higher
quality pictures from 480p/1080i, or 1080p (highest among the
player output), if your TV, proiector or AV amplifier (receiver)
is compatible.
Blu-ray Disc player
to HDMI OUT
HDMI cord
(supplied with BDP-S301 only)
TV, projector, or AV
amplifier (receiver)
This Blu-ray Disc player incorporates High-Definition
Multimedia Interface (HDMI r:'_)technology. HDMI, the HDMI
logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
Notesonconnectingto the HDIVllOUTjack
Observe tile follov,,ing as improper handling may damage tile
HDMI OUT jack and the connector.
• Carefidly align the HDMI OUT jack on the back of the player
and the HDMI connector by checking their shapes. Make sure
the connector is not upside dov,,n or tilted.
• Be sure to disconnect the HDMI cord when moving the player.
About indicators for HDIVllconnection
After tile player is turned on, the HD indicator on the front panel
lights up when outputting 720p/1080i/1080p video signals. The
HDMI indicator lights up when an HDMI device is connected.
• Consumers should note that not all high definition television sets are
fully compatible with this product and may cause artifacts to be
displayed in tile picture. In tile case of 480/72(g1080 progressive scan
picture problems, it is recommended that tile user switch tile
connection to the 'standard definition' output. If there are questions
regarding our TV set compatibility with this model 480p/720p/1080p
Bh>ray Disc player, please contact our customer service center.
• If tile picture is not clear, nalural, or to your satisfaction, change tile
video output resolution by pressing VIDEO FORMAT (page 46).
• Be sure to use only an HDMI cord that bears the HDMI logo.
About the 'BRAVIA' Theatre Sync
features (for HDMI connections only)
By connecting Sony components that are compatible w,ith the
Hf)MI Control function with an HDMI cord, operation is
simplified as below:
• One-Touch Play (page 21)
You can turn on the player and TV/AV receiver, set the TV/AV
receiver's input to the player, and start playback with one touch
of the 12:> button.
• System Power-Off
When you turn the TV off by using the POWER button on the
TV's remote, the HDMI compatible components turn off
automatically.
To prepare for the 'BRAVIA' Theatre Sync
features
Set "HDMI Control" of "Options" setup to "On" (page 52).
Depending on the connecled conlponent, Ihe HDMI Control funclion
nlay uo[ work. Refer lo tile operating instructions supplied wilh tile
compoueuI.
¢/a
• If you place the player on the cabinet with the HDMI cord
connected, do not apply too nmch pressure to the cabinet wall.
It may damage the HDMI OUT jack or the HDMI cord.
• When connecting or disconnecting, do not screw in or rotate
the HDMI connector.
11