Filter
Top Products
0 Connecting to an AV amplifier
(receiver) havinga DolbySurround(Pro
Logic) decoder and 3 to 6 speakers
If your AV amplifier (receiver) only has L and R audio input
jacks, use q[_. If your amplifier (receiver) has a digital input
jack, use _).
You can enjoy surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital or DTS)
discs.
Blu-ray Disc player
Connecting to an AV amplifier
(receiver) with 5.1ch input jacks and 6
speakers
If your AV amplifier (receiver) has 5.1 channel inputs, use
Blu-ray Disc player
to DIGITAL OUT to AUDIO OUT
(COAXIAL or OPTICAL) L/R
Optical digital cord --
(not supplied)
Coaxial digital cord --
(not supplied)
(white)Q
(white) i
(red)
--Stereo audio
cord (supplied)
(red)
to coaxial or optical _ _ _
digital input to audio input
[Speakers] I [Speakers]
,..................... _ AM Amplifier o--,_
....... ::] (receiver) with a /
_ decoder
r-qF-q !' ----- Hr--q
Rear L Rear R ............. , _............................_Front (R)
r-_ Center [_ Front (L)
Subwoofer Rear (mono)
to 5.1CH
OUTPUT l
Stereo audio _
cord (one is [_
supplied)
_°_ Monaural
audio cord
(not supplied)
_ _ _ to audio input
Subwoofer
_%, : Signal flow
Front(L)
"_"Hint
For correct speaker location, see the operating instructions of the
connected conlponenls.
"_" Hint
For correct speaker location, see the operalirJg instructions of the
connecicd conlponenls.
When connecting 6 speakers, you do notneed the "Rear (mono)" speaker
aboxe.
14