Sony 4-130-029-13(1) Home Theater System User Manual


 
45
GB
“BRAVIA” Sync Features
Preparing for the
“BRAVIA” Sync
To use the “BRAVIA” Sync, turn the Control
for HDMI function on for both the receiver
and the connected component. The receiver is
compatible with the “Control for HDMI-Easy
Setting” function.
When your TV is compatible
with the “Control for HDMI-Easy
Setting” function
When you connect a Sony TV with the
“Control for HDMI-Easy Setting” function,
the Control for HDMI function of the receiver
can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1 Make sure that the receiver, TV, and
playback components are connected
using an HDMI cable (not supplied).
(The respective components must be
compatible with the Control for HDMI
function).
2 Turn on the receiver, TV and playback
components.
3 Turn the Control for HDMI function of
the TV on.
The Control for HDMI function of the
receiver and all the connected components
are simultaneously turned on. During
setup, “SCANNING” appears in the
display, and once setting is completed,
“COMPLETE” will appear. Wait until the
setup is complete.
For details on setup of the TV, refer to the
operating instructions of your TV.
When your TV is not compatible
with the “Control for HDMI-Easy
Setting” function
Turn the Control for HDMI function of the
receiver and the connected component on
individually.
1 Perform the steps given in “When your
TV is compatible with the “Control for
HDMI-Easy Setting” function” (page
45).
2 Press AMP MENU.
“SET HDMI” appears on the display.
3 Press or b to enter the menu.
4 Press V/v repeatedly to select
“CONTROL FOR HDMI”.
“CONTROL FOR HDMI” scrolls across
the display, then “CONTROL” appears.
5 Press or b to enter the parameter.
6 Press V/v repeatedly to select “CTRL
ON”, then press .
The Control for HDMI function is set to on.
7 Set the Control for HDMI function of the
connected component to on.
8 Select the HDMI input (BD, DVD, SAT)
of the receiver and TV to match the
HDMI output of the connected
component, so that the image from the
connected component is displayed.
For details on setting the TV and connected
components, refer to the operating
instructions of the respective components.
46
78
0
ENTER
9
RETURN/EXIT
AMP MENU
CLEAR
DISPLAY
SOUND
FIELD
5
TOOLS/
OPTIONS
MENU/HOME
AMP
MENU
V/v/b,
continued