Filter
Top Products
35
GB
Amplifier Operations
Settings for the HDMI
(SET HDMI menu)
You can use the SET HDMI menu to make
various adjustments for HDMI settings.
Select “SET HDMI” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 32) and
“Overview of the menus” (page 33).
SET HDMI menu parameters
x CONTROL FOR HDMI (Control
for HDMI)
Lets you turn the Control for HDMI function
on or off. For details, see “Preparing for the
“BRAVIA” Sync” (page 45).
x VOL LIM (Volume Limit)
Lets you set the volume limit of your receiver.
For details, see “Using the Volume Limit
function” (page 47).
x P.SAVE (Power Save)
Lets you save the power consumption during
power standby mode while Control for HDMI
function is set to on.
For details, see “Using the Power Saving
function (Power Save)” (page 48).
Settings for the Auto
Calibration
(A.CAL menu)
You can use the A.CAL menu to make settings
for the Auto Calibration function to suit your
preference.
Select “A.CAL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 32) and
“Overview of the menus” (page 33).
A.CAL menu parameters
x START (Auto Calibration start)
Lets you start the Auto Calibration function.
For details, see “Performing Auto Calibration”
(page 24).
x A.CAL CLR (Clear Auto
Calibration result)
Lets you delete the Auto Calibration result.
For details, see “Clearing the measurement
result” (page 26).