Filter
Top Products
20
GB
The following illustration shows how to
connect video components such as DVD
player, DVD recorder, VCR, etc.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Notes
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
• Be sure to connect the video output of the DVD
player, DVD recorder and VCR to the TV, so that
the image is displayed on the TV. Refer to the
operating instructions of each connected
component for details.
• You cannot do recording on the DVD recorder or
VCR via this receiver. For details, refer to the
operating instructions supplied with the DVD
recorder or VCR.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting video components
AM
ANTENNA
DMPORT
HDMI
DC5V 700mA MAX
BD IN OUTSAT INDVD IN
L
R
L
R
AUDIO IN
SA-CD
/
CD
OPT INAUDIO IN
TV
TV
VIDEO 2
COAX IN
SAT
OPT IN
DIGITAL
AUTO
CAL MIC
AUDIO IN
VIDEO 1
DVD recorder,
DVD player
Audio signal
A
AAudio cord (not supplied)
BCoaxial digital cord (not supplied)
COptical digital cord (not supplied)
Audio signal
BC
Satellite tuner,
Set-top box
VCR
Audio signal