Filter
Top Products
40
40
JumpSet
To set the Jump button to a specific channel (other than a traffic channel), do the following:
1. Use the CHANNEL UP and CHANNEL DOWN buttons to highlight the "JumpSet" option, and press the
Select button.
2. The following screen will be displayed:
Use the CHANNEL UP and CHANNEL DOWN buttons to tune to the channel you want assigned to the Jump
button. When the channel is tuned, press and hold the Jump button for 2 seconds until the following screen
is displayed:
The channel selected is now assigned to the Jump button. To exit the JUMP settings menu, press the MENU
button. At any time while listening to a channel (other than a traffic channel), the channel may be assigned to
the Jump button by simply pressing and holding the Jump button for 2 seconds.