Filter
Top Products
27
Pressing the Jump button allows you to quickly tune to the specific channel you have programmed, and then
tune back to your original channel by pressing the Jump button again. (Refer to the Menu Options section of
this manual for instructions for configuring the Jump button.) If the Jump button has been preset to the traffic
option, which will cause the Receiver to access a specific city traffic report, pressing the Jump button will
immediately begin a search for the city's traffic report. The will be displayed in the lower right corner of the
display screen to indicate that a JUMP search is active. The search process may take up to 4 minutes until the
city's traffic report found. The Receiver will automatically tune to the traffic report channel when the traffic
report is found.
Note: Pressing the Jump button again while the Receiver is actively searching will cancel the search.
Pressing the Jump button after the Receiver has tuned to the traffic report channel will return you to the
previous channel. If the Jump button has been preset to the JumpSet option, pressing the Jump button will
immediately tune to the channel preset into the JumpSet. The will be displayed in the lower right corner of
the display screen to indicate that the JUMP preset channel is currently tuned.
Pressing the Jump button again will return to the previous channel.
Note: The channel preset for the Jump button remains the same regardless of which preset memory
bank is currently selected.