Filter
Top Products
68
Appendix: Manual Network Configuration
iii. Enter the Gateway IP address for the
network.
iv. Enter the Primary DNS IP address for
the network.
v. Enter the Secondary DNS IP address
for the network, or leave blank if there
is none.
h. Enter your wireless network name (SSID).
Note that the SSID is case sensitive. Turn
the TUNE knob to scroll through the list of
characters and highlight each character.
Press the TUNE knob to select the
highlighted character and move to the next
character. If you make a mistake, turn the
TUNE knob to highlight BKSP and press the TUNE knob to erase the
character. When done, turn the TUNE knob
to highlight OK and press the TUNE knob.
i. Select the authentication type, Open (no
key (password)), Pre-Shared key, WPA, or
WPA2. Turn the TUNE Knob to highlight your
selection and press the TUNE knob. If you
have selected Open, skip ahead to step k.
j. Depending upon your selection, complete these additional steps:
•Pre-Shared Key:
i. Select whether the Pre-Shared Key has WEP encryption disabled or
Key: 9/9
BKSP
OK
CANCEL
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
Open
Pre-Shared Key
WPA
WPA2
>
Authentication 7/9
IP settings 3/9
IP address
.
0
.
0
.
0
Subnet mask
.
255 255
.
255
.
0
0