Filter
Top Products
20
Appendix B. Rack Mounting the DFR11EQ
The DFR11EQ comes in a
1
/
2
-rack chassis specially designed for sturdiness. The
sagging and bending found in most
1
/
2
-rack designs is eliminated — the brackets and
straddle
bars are designed to ensure that the units will be installed securely
.
WARNING:
Do not torque the screws too tightly
, or the chassis may be damaged.
Single Unit
1. Align
the supplied rack-mount brackets over the holes.
2.
Fasten with the 8 supplied screws.
Dual-Mounted Units
1. Align
two units side by side so that the front panels both face the same direction.
2.
Place the supplied straddle bars in the recesses on the top and bottom of the units,
so that they overlap both. Fasten with the supplied screws.
NOTE
: Be sure to use both straddle bars when installing dual units.
3.
Position the rackmount brackets over the holes in the side of the unit. Fasten with
the supplied screws.
Mounting in an Equipment Rack
SINGLE MOUNT
DUAL MOUNT
1. Insert
the unit(s) into a 19-inch equipment rack.
2.
Fasten the unit(s) to the rack using all four of the supplied screws.
Main Menu