Filter
Top Products
16
Accessing Connected DFR11EQs
Configuring the Computer Serial Port
1. Launch
the DFR1
1EQ software.
2.
Click on
Setup
in the main menu bar
.
3.
Click on the
COM port
option of the drop-down menu.
4.
In the
DFR1
1EQ Serial Port
window
, select an available COM port on the computer
.
5.
Click on the
OK
button.
NOTE: The COM port selection is saved in the DFR11EQ file, and will not need to be
selected
again unless you need to change the hardware configuration.
Accessing the Connected DFR11EQs
To bring the networked DFR11EQ’s online, click on the CONNECT button of the DFR
panel. Or, select the
Connect
option of the
Setup
drop-down menu of the main menu bar.
The
program searches for each unit connected in
the network, reading the Shure Link Device
ID
of each.
Shure Link Device ID Selection
DFR11EQ’s
are addressed by their Shure Link Device ID. For instructions in assigning
Shure
Link Device IDs, see
Shure Link
Device ID
. Units with the same Device ID will receive
the same settings from the computer. To access Units with different Device ID’s, you will
need
to select the Device ID from the main menu.
T
o select a Device ID:
1.
Click on
Device ID
in the main menu bar
. A drop-down menu will appear showing
the Device IDs of all the connected DFR1
1EQs.
2.
Click on the desired Device.
The
Device ID will appear beside the DFR1
1EQ heading at the top of the main window
,
indicating
that all the units with that Device ID will receive computer commands.
Main Menu