Sherwood R-903 Stereo Receiver User Manual


 
ENGLISH
14
Using a punch-through function
This remote control may be programmed to operate
either the AUDIO volume punch-through or the TV
volume and/or TV channel punch-through in
conjunction with any of the eight components
controlled by this remote control.
For example, since this receiver will likely be used as
the sound system while watching TV, you may want
to adjust this receiver’s volume although this remote
control is set to control the TV.
• When programming this remote control for the
AUDIO volume punch-through, press and hold
down both “AUDIO” button and “VOLUME
button for more than 1 second.
• If programming is performed successfully, the LED
will flicker twice.
When you want either TV volume or TV channel
punch-through, press and hold down both “TV”
button and either “VOLUME ” or “CH
button for more than 1 second.
Note :
• If you use one of AUDIO and TV volume punch-
through functions, you cannot use the other.
Removing a punch-through function
• When removing the AUDIO volume punch-through,
press and hold down both “AUDIO” button and
“VOLUME ” button for more than 1 second.
• If removing is performed successfully, the LED will
flicker twice.
When you want to remove either TV volume or TV
channel punch-through, press and hold down both
“TV” button and either “VOLUME ” or “CH
button for more than 1 second.
Removing all punch-through functions
Press and hold down both “AUDIO” button and
“AUTO” button for more than 1 second.
• If removing all punch-through functions is
performed successfully, the LED will flicker twice.
VOLUME
AUDIO
VOLUME
AUDIO
AUDIO
AUTO