Sharp MD-R2 MiniDisc Player User Manual


 
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of non use, be sure to
charge it fully.
1 Open the rechargeable battery com-
partment cover.
2 Insert the rechargeable battery.
Insert the side with the arrow first.
3 Close the rechargeable battery com-
partment cover.
4 Plug the AC adaptor into the AC outlet,
and then insert the plug on the AC
adaptor cord into the DC IN 5V jack.
5 Press the /:OFF button twice to begin
charging.
” will appear, and the battery will
begin charging.
Battery charging will be complete in 2.5
hours. When the charging is com-
plete, will go out.
AC 120V, 60 Hz
To an AC outlet
POWER SOURCE
Notes:
After charging is complete, the AC
adaptor may be left connected. (For ex-
ample, when charging at night)
The battery will not be charged when-
ever the power to the main unit is
turned on.
If the AC adaptor is removed from the
main unit or from the AC outlet while
charging, “ ” will not disappear for
about 1 minute. This is normal.
Do not force open the rechargeable
battery door too far.
Do not attach the optionally available
battery case when charging the internal
battery.
This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, an optionally available battery case (AD-M70BC), and an optionally available
car adaptor (AD-CA20X).
1
2
5
4
:OFF
5V
DC IN
Mark
To the
DC IN 5V
jack
Insert
securely,
all the
way in.
6
MD-MS702