Sharp MD-R2 MiniDisc Player User Manual


 
To erase tracks
To erase tracks one at a time:
1 Start playing the track you want to
erase, and press the button.
The unit will enter the pause mode.
2 Press the EDIT/A.MARK/TIME MARK
button to select “ERASE”.
3 Press the ENTER/F.PLAY/SYNCHRO
button.
To cancel the operation, press the
/:OFF button.
4 Press the ENTER/F.PLAY/SYNCHRO
button again.
The track will be erased.
5 To erase other tracks, repeat steps 1 -
4.
To erase all of the tracks at once:
1 While in the stop mode, press the
EDIT/A.MARK/TIME MARK button to
select “ALL ERASE”.
“ALL ERASE” can also be selected by
holding down the EDIT/A.MARK/TIME
MARK button for at least 2 seconds.
2 Press the ENTER/F.PLAY/SYNCHRO
button.
To cancel the operation, press the
/:OFF button.
3 Press the ENTER/F.PLAY/SYNCHRO
button again.
All of the track numbers, track names,
and disc names will be erased.
Notes:
Once a track has been erased, it can-
not be recovered. Double-check the
track number before erasing it.
When a track is erased, the numbers
assigned to the tracks following the
erased track will be automatically
decreased by one.
When a track is erased, the track name
will be erased at the same time.
1
2
1
Number of the
paused track
2
3
4
18
MD-MS702