Sharp MD-R2 MiniDisc Player User Manual


 
6 When a sound, such as a person
speaking, is picked up by the
microphone, recording will begin auto-
matically.
If a silence lasts for 3 seconds or more,
the recording will be paused automat-
ically. However, the unit will not pause
for about the first 10 seconds after
recording has started.
To interrupt a synchro recording:
Press the button while recording.
The Mic synchro recording mode will
be canceled, and the unit will enter the
recording stand-by mode.
To resume synchro recording, press
the ENTER/F.PLAY/SYNCHRO button
again.
To stop recording:
Press the /:OFF button.
Recording from the microphone
(Mic manual recording)
You can start recording manually (any
time you like).
1 Put the unit in the recording stand-by
mode. (Perform steps 1 - 4 in the “Mic
synchro recording” section.)
2 Press the button.
Recording will start.
To interrupt a recording:
Press the button while recording.
The unit will enter the recording stand-
by mode.
To resume recording, press the
button again.
The track number will be increased by
one each time you interrupt a record-
ing.
To stop recording:
Press the /:OFF button.
Notes:
If you want to use a microphone, be sure it is a plug-in power type microphone that
can be powered by the main unit.
Insert the plug firmly. Otherwise, the recording will not be made properly.
Use a microphone with a 1/8" (3.5 mm) diameter stereo mini plug.
When a recording is made using a stereo microphone (optionally available), an analog
recording will be made.
While making a mic recording, do not connect anything to the LINE IN jack on the
main unit.
14
MD-MS702