Sharp MD-R2 MiniDisc Player User Manual


 
1 Insert the headphones plug firmly into
the headphones jack on the remote
control unit.
2 Plug the remote control unit into the
jack on the main unit. Push the plug
all the way in.
Since the remote control unit plug has
only one correct orientation, plug it in
as shown in the drawing.
3 Load a MiniDisc in the direction indi-
cated by the arrow on the MiniDisc,
with the label side facing up. (Insert the
MiniDisc firmly, until a click is heard.)
The power will be turned on automat-
ically, and playback will start from the
first track. (Auto-play function)
After playback of the last track has
finished, the unit will stop automatically.
Playback does not start when a
MiniDisc is inserted:
Press the button.
In the following cases, the auto-play func-
tion will not work.
When the recordable MiniDisc write
protection tab is closed (page 9)
When the auto-play function has been
canceled (page 35)
4 Press the + button to increase the
volume and the - button to decrease
the volume.
5 Adjust the bass level.
Each time the BASS/DEL button is
pressed, the tone will be switched as
follows:
When recording, it is impossible to ad-
just the bass level (Bass emphasis is
canceled).
The most recent volume or bass set-
tings are saved when the power is
turned off.
VOL /
NAME
BASS/DEL
BASS
PLAYING A MINIDISC
Track number
Track name
(Nothing will be displayed for MiniDiscs
that do not contain track names.)
BASS 1
BASS OFF
BASS 3
BASS 2
Bass sounds are emphasized more.
Bass sounds are emphasized slightly.
Bass emphasis is canceled.
Bass sounds are emphasized even more.
Volume (0 - 30)
Remote
control unit
For the
left (L)
Headphones
For the
right (R)
To the
jack
21
MD-MS702