Filter
Top Products
MD-MT877/MD-MT877C
– 21 –
: Continuous record menu
Continuous Record
* When the [STOP] button is pressed in specific condition, the "TEST MODE STOP" state is set.
* In the start address set state the start address changes as follows when the [DISP] button is pressed.
• Continuous record from the current pickup position
: Continuous record menu
: Start address setting
: Continuous record
# # # #: Address
: Continuous record
# # # #: Address
DISP
T R E C
A d 0 0 3 2
PLAY
A P # # # #
• Continuous record playback from any address
A d 0 0 3 2
0 0 3 2 H (initial value) 0 3 C 0 H 0 7 0 0 H 0 8 A 0 H
A d 0 3 C 0
DISP
A d 0 7 0 0
DISP DISP
DISP
A d 0 8 A 0
* In the start address setting state the start address change digit changes when the [P-MODE] button is pressed.
* In the start address set state the value of selection digit changes in the range of 0h to Fh when
the [FAST FORWARD/REVERSE] button is pressed.
* In the continuous record state and start address set state the record laser power changes in the
range of "0h to Fh" when the [VOLUME +/–] button is pressed. (Initial value 0DH)
A d 0 0 5 0
1st digit (initial value) 2nd digit 3rd digit
A d 0 0 5 0
MODE
A d 0 0 5 0
MODE
MODE
A d 0 9 5 0
0 9 5 0 H
PLAY
T R E C
A P # # # #
AUTO1 Practice finish?
AUTO2 Practice finish?
YES
YES
E r A D J
AUTO2 Practice
No error?
A D J. N G
NO
NO
YES
NO
Enter the EEPROM setting mode, and press the FAST FORWARD button.
Change the MSL setting value from 00 to 08 by using CTRL_ (control setting menu).
(If the MSL remains in 00, no signal is recorded.)
* In the continuous playback state the number of jump lines changes as follows shown
the [BASS] button is pressed.
1 (initial value) 10
1 T R
1 0 T R
BASS
BASS
1 0 0 s t p
BASS
* When the [FAST FORWARD] button is pressed in the continued playback mode, jump of specified
number of lines occurs in the external periphery direction.
If the key is held down jump occurs continuously (100 ms cycle).
* When the [FAST REVERSE] button is pressed in the continuous playback mode, jump of
specified number of lines occurs in the internal periphery direction.
If the key is held down, jump occurs continuously (100 ms cycle).
• Focus balance Adjustment mode
100step
DISP
T-PLAY Each indication
b # # #
PLAY
Others indication
* The focus balance adjustment mode is available only for low reflection discs.
* The RANDOM marker lights up in the focus balance adjustment mode.
* The focus balance ( ) can be changed by the VOL UP/DOWN button operation.
* If the PLAY button is pressed in the focus balance adjustment mode, the unit returns to the
continuous playback mode.
: Continuous playback menu
: Focus balance Adjustment mode
: Focus balance
# # # : Jitter error