Sharp MD-M1H Stereo System User Manual


 
42
Connecting external units
Before connecting external units, set this unit to the stand-by mode and turn off the power to the external
units.
Connecting to stereos or MD/CD players (equipment which can output analogue signals)
The other MD/CD player
Commercially available lead
with 3.5 mm (1/8") stereo
mini-plug and RCA plugs
To the output /
headphone socket
RIGHT
LEFT
To the analogue
output sockets
LEFT
RIGHT
RIGHT
LEFT
Red plug To RIGHT
White plug To LEFT
Commercially available RCA lead
AUX
INPUT
LEVEL
RIGHT
LEFT
RIGHT
LEFT
Note:
When the audio output signal of an external unit is connected to this unit, oscillation may occur.
In such a case, disconnect either the input or output connection.
Headphones
Notes:
Before plugging in or unplugging the headphones, make sure the volume level is reduced.
Be sure your headphones have a 3.5mm (1/8") diameter plug and are between 16 ohms and 50
ohms impedance. The recommended impedance is 32 ohms.
When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired volume.
USING EXTERNAL UNITS