Filter
Top Products
40
■ Timer recording
Before timer recording, the following preparations
are required.
● Load a CD, a recordable MD.
● Preset the radio station.
● Before setting the timer, make sure that the
clock setting is correct. (Page 9)
1 Press the ON/STAND-BY button to turn the
power on.
2 Press the CD, TUNER(BAND), AUX button to
select desired function.
3 Press the TIMER button to select the timer
recording mode.
4 Whilst “f REC” is flashing, press the ENTER
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
REC
5 Within 5 seconds, press the or button to
set the hour to start, and then press the ENTER
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
6 Press the or button to set the minute to
start, and then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
● If not set manually, the ending time will automati-
cally be set for one hour after the starting time.
7 Press the or button to set the hour to stop,
then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
8 Press the or button to set the minute to
stop, then press the ENTER button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
REC
SLEEP
REC
DISC TOC
TRACK
TOTAL
REMAIN
REC
SLEEP
REC
REC
9 Press the VOLUME button to adjust the sound
volume.
● Be careful not to turn the volume up too high.
10 Press the ON/STAND-BY button to enter the
stand-by mode.
● The TIMER STAND-BY indicator will light up.
11 When the timer start time is reached, timer
recording will start.
12 When the timer end time is reached, timer
recording will stop.
● “f REC” will disappear, and the timer mode will
be cancelled.
The unit will enter the stand-by mode.
Notes:
● The timer cannot control the component con-
nected to the Auxiliary Input sockets.
● When the available recording time has been con-
sumed, the recording will stop.
● Timer playback and timer recording cannot be
set at the same time using the timer.
Use the timer in one mode or the other.
To change the programmed contents:
Start again from step 1.
To confirm the timer setting:
Press the TIMER button once.
● The turn-on time, the turn-off time and name of
sound source will be displayed.
To cancel timer operation:
Whilst in the timer stand-by mode, press the ON/
STAND-BY button to turn the power on.
Press the TIMER button repeatedly to turn off
the timer, “f REC” will go out.
(Continued)
1,10
5,6,7,8
3
2
9
4,5,6,7,8
(Remote control operation)