Filter
Top Products
25
2
4
3
(Continued)
5 When a programme of the type specified starts
on an ON (other network) station, the unit will
automatically switch to the station broadcasting
the selected programme type, and "PTY" will
flash.
6 When the programme specified for the ON sta-
tion is over, the unit will automatically return to
the original station you were tuned to.
Note:
● If the EON button is pressed when "EON" is not
displayed, "NO EON" will appear for 5 seconds
to indicate that the unit cannot enter the EON
stand-by mode.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON
button.
("Programme type" →"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON
button. Within 4 seconds, press it again. The EON
stand-by mode will be cancelled.
("PTY" will go out.)
About the PTYI (Dynamic PTY Indicator):
PTYI (Dynamic PTY Indicator) will appear whilst
the Dynamic PTY station is being received.
Dynamic PTY indicates that the PTY for the station
tuned in, or the PTY referenced in the EON data, is
assessed whenever the programme changes and
may be changed.
Note:
● When "PTYI" appears, if you press the DISPLAY
MODE button to display the programme type, you
can check the type of programme you are actu-
ally receiving.
■ EON-PTY
PTYI
Lights up
Goes out
Meaning
Tuned into a dynamic PTY station.
Tuned into a static PTY.
1 Tune in the desired RDS station (when a station
name is being displayed).
2 Press the EON button when "EON" appears.
● "PTY TI" and "SELECT" will appear alternately
for about 6 seconds.
3 Whilst they are being displayed, select the de-
sired programme type pressing the PRESET (X
or W) button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
● The selected programme type will flash.
4 Within 4 seconds, press the PTY.TI SEARCH
button.
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
DISC TOC
TRACK
MEMORY
RANDOM
TOTAL
REMAIN
RECkHz
MHz SLEEP
● The selected programme type and "WAITING"
will be displayed for 2 seconds each.
● "PTY" will appear, and the unit will enter the EON-
PTY stand-by mode.
(Main unit operation)