Filter
Top Products
9
1
7
6
5
4
3
2
1
9
2011 January 27
HT-SB600
E-17
Note:
The backup function will protect the memorized function
mode for a few hours should there be a power failure or the
AC power cord becomes disconnected.
Auto power on function:
When you press any function button on the remote control,
the unit will turn on.
Auto power off function:
The unit will automatically go to stand-by mode if:
1. No signal is detected within 20 minutes.
2. No reception of tuner broadcast signal within 20
minutes.
The audio return channel (ARC) function enables an HDMI
ARC-capable TV to send the audio stream to the HDMI
OUT jack of the receiver. To use this function, you must
select the TV ARC input and your TV must supports the
ARC function.
The Dolby Virtual Speaker (DVS) creates virtual surrounds
comparable to the 5.1ch sound produced by the 3.1ch
speaker.
When setting DVS to “ON” for 2 channel stereo signals,
Dolby Pro Logic II brings out virtual sound effects through
the signals converted into 5.1ch.
Notes:
● Monaural signals do not generate surround effects.
● DVS equalizer effect may not be obtained depending
on signal types (the Dolby Virtual Speaker indicator
blinks). In this case, set the DVS mode to OFF.
● The DVS can be turned OFF by selecting other preset
equalizer modes.
This product incorporates decoders supporting the Dolby
Digital system and DTS system.
General control (continued)
1. Press the BASS/TREBLE
button to select “BASS”.
2. Within 5 seconds, press the
VOLUME (+ or –) button to
adjust the bass.
1. Press the BASS/TREBLE
button to select “TREBLE”.
2. Within 5 seconds, press the
VOLUME (+ or –) button to
adjust the treble.
When the X-BASS button on the
remote control is pressed, the
unit will enter the extra bass
mode which emphasizes the
bass frequencies, and X-BASS
indicator will appear. To cancel
the extra bass mode, press the
X-BASS or BASS/TREBLE
button.
On the main unit:
When pressing the INPUT button, the input source will
change. Press the INPUT button repeatedly to select
desired input source.
On remote control:
Press the LINE 1 or 2 button to select LINE IN 1 input or
LINE IN 2 input.
Press the DIGITAL 1 or 2 button to select DIGITAL IN 1
input or DIGITAL IN 2 input.
Press the HDMI 1 or 2 or 3 to select HDMI input.
Press the TUNER(BAND) button repeatedly to select tuner
function (FM ST/FM Mono/AM).
Press TV ARC button to select TV ARC.
Bass control
Treble control
X-Bass control
X-BASS
X-BASS
Function
HDMI 3 TV ARCHDMI 2 DIGITAL 1
DIGITAL 2
HDMI 1
LINE 2 LINE 1FM STFMAM
The Dolby Virtual Speaker creates multichannel-
like sound effects.
Compared with the cinema mode, the bass sound
level is slightly reduced.
The Dolby Pro Logic II indicator also lights up if
2ch sound signals are detected.
DTS (Digital
Theater
Systems)
One of the digital audio systems for
theatrical use. As the sound quality is
emphasized, you can enjoy the realistic
sound effect in the home theater system.
Lights up when detecting DTS signal.
Dolby Digital
One of the digital audio systems for
theatrical use. You can also enjoy the
stereophonic effect in the home theater
system.
Lights up when detecting Dolby Digital
signal.
Dolby Pro
Logic II
System expanding 2ch stereo sound to
more spacious sound. When setting
Dolby Virtual speaker to “ON”, Dolby Pro
Logic II is activated to enjoy the stereo
sound effect.
Lights up when Dolby Pro Logic II is
activated.
PCM
(Pulse Code
Modulation)
This is a general term for digitally
encoded audio signals on a CD or DVD.
This unit lets you enjoy playback of digital
signals from sources such as CD or DVD.
The indicator lights up when a PCM
signal is detected.
Audio Return Channel (ARC) (Audio
Return Channel submenu)
Dolby Virtual Speaker (DVS) sound mode
DVS