Filter
Top Products
9
1
7
6
5
4
3
2
1
9
2011 January 27
HT-SB600
E-15
Plastic film covering can be removed or peeled off.
Caution:
● Replace all old batteries with new ones at the same
time.
● Do not mix old and new batteries.
● Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
● Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
● Installing the batteries incorrectly may cause the unit to
malfunction.
● Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
Notes concerning use:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
● Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
● Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit.
● Keep the remote control away from moisture, heat,
shock, and vibrations.
Point the remote control directly at the remote sensor on
the main unit.
The remote control can be used within the range
shown below:
To select DIGITAL IN 1 (optical input) or DIGITAL IN 2
(coaxial input) function:
On main unit: Press INPUT button repeatedly until
“DIGITAL 1” or “DIGITAL 2” appears on the
display.
On remote
control:
Press the “DIGITAL 1” or “DIGITAL 2”
button.
To select LINE IN 1 or LINE IN 2 function:
On main unit: Press INPUT button repeatedly until
“LINE 1” or “LINE 2” appears on the
display.
On remote
control:
Press the “LINE 1” or “LINE 2” button.
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar). Batteries are not included.
1 Open the battery cover.
2 Insert the batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them
toward the battery terminals.
3 Close the battery cover.
Audio connections to TVs, DVD
players, VCRs, etc. (continued)
Remote Control
Battery installation
Remote Control (continued)
Test of the remote control
ARC
TV
123
HDMI
Remote sensor
8" - 20"
(0.2 m - 6 m)
15°15°