Filter
Top Products
2 This sets the audio output mode for DIGITAL AUDIO OUT (COAXIAL jack / OPTICAL terminal) when selecting
OPTICAL/COAXIAL DIGITAL OUTPUT or 2ch AUDIO OUTPUT
BITSTREM PCM (STEREO)
BITSTREM
DOLBY DIGITAL
DTS
BITSTREM PCM (STEREO)
AAC
PCM (STEREO)
CONFIRM
TV ASPECT RATIO
HDMI VIDEO OUT
HDMI AUTO DETECTION
COMPONENT VIDEO OUT
AUDIO OUT
DYNAMIC RANGE CONTROL
MENU [AUDIO VIDEO SETTINGS - AUDIO OUT]
Selected item Description
DOLBY DIGITAL
DTS
AAC
BITSTREAM • Select this when connecting to SURROUND
equipment with a built-in decoder for DOLBY DIGITAL,
DTS, AAC.
• Setting to BITSTREAM will output each audio signal
by BITSTREAM.
PCM (STEREO) • Select this when connecting to 2 channel stereo audio
equipment.
• Setting to PCM (STEREO) will output by converting
each audio signal into PCM 2channel audio signal.
DOLBY
DIGITAL
DTS
AAC
BITSTREAM
PCM
(STEREO)
DYNAMIC RANGE CONTROL
• This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume.
Use this when it is hard to hear dialogue.
AUDIO VIDEO SETTINGS
SPEAKER SETTINGS
QUICK START
AUTO POWER OFF
AQUOS LINK
PLAYBACK SETTING
FRONT DISPLAY / LED
VERSION
SOFTWARE UPDATE
SYSTEM RESET
MENU [AUDIO VIDEO SETTINGS]
* Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output
may be applied to the speakers.
SHIFT,
NORMAL
35
Settings
q
NORMAL SHIFT
TV ASPECT RATIO
COMPONENT VIDEO OUT
HDMI VIDEO OUT
HDMI AUTO DETECTION
AUDIO OUT
DYNAMIC RANGE CONTROL
MENU [AUDIO VIDEO SETTINGS - DYNAMIC RANGE CONTROL]
NORMAL*: The some
audio output range is
played as the original
recorded audio output
range.
SHIFT: When Dolby
Digital audio is played
back, the dynamic
range of the audio is
adjusted so that the
dialogue portion can be
heard easily. (If the audio
sounds abnormal, set to
“NORMAL”.)
SETTINGS
BD-HP20U_en_e.indd 35BD-HP20U_en_e.indd 35 2007/08/06 14:17:522007/08/06 14:17:52