Filter
Top Products
7
Powering the receiver
The receiver can be powered from three different power
sources:
̈ Secure the mounting frame µ
to the camcorder housing
using four screws ¾.
̈ Insert the receiver into the
slot-in facility until the 25-pin
connector securely connects.
̈ Screw the receiver (from
above) to the mounting frame.
Power source Notes on operation
Camcorder with mounting kit See page 6
Camcorder with
GA 3041-C slot-in housing ¹
See instructions for use
of the GA 3041-C
GA 3041-C slot-in housing ¹
with GA 3041-B battery
adapter Ƹ and BA 50/BA
250 accupack ¸ or B 50/B 250
battery box
See “Accessories” on
page 23 and
instructions for use
of the GA 3041-C
µ
ᕩ
ᕩ
¹
Ƹ
¸