Filter
Top Products
6
Putting the receiver into
operation
Connecting the antennas
The receiver is supplied with two antennas which are
necessary for true diversity operation (see “Diversity
reception” on page 22).
Mounting the receiver into a camcorder
The receiver can be inserted into the slot-in facility of most
professional camcorders. Suitable mounting kits are avail-
able as accessories from your Sennheiser partner.
Mounting kits are available for the following camcorder
types (see “Accessories” on page 23):
A mounting kit consists of:
y 1 sub-D adapter
y 1 mounting frame
y Screws
By way of example of an Ikegami or Panasonic camcorder,
the following describes how to insert the receiver into the
camcorder’s integrated receiver slot:
̈ Connect the antennas to the
antenna sockets · and ¶.
̈ Screw the antennas tight.
Camcorder Mounting kit
Sony GA 3041-15 (15-pin)
Ikegami, Panasonic GA 3041-25 (25-pin)
Thomson GA 3041-44 (44-pin)
̈ Secure the sub-D adapter º to
the bottom of the receiver
using two screws ¾.
ᕧ
ᕢ
ᕨ
ᕩ
ᕩ