Sennheiser 500 Series Headphones User Manual


 
Overview of the operating menus
28
SK 500 and SKM 500
TX-Mute Transmitter is muted or
no pilot tone
RX-Mute Receiver is muted
Low Battery Charge status of the transmitter battery/the BA 2015 accupack is critical
Exit Exits the submenu “Warnings” and returns to the extended menu “Advanced Menu
Display Function of the menu item
Main menu
“Menu”
Sensitivity
Frequency Preset
Name
Auto Lock
Advanced
Exit
Tune
Mute Mode (SK)
RF Power
Cable Emulation (SK)
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Extended menu
“Advanced”
Display Meaning
Main menu “Menu”
Sensitivity Adjusts the sensitivity “AF
Frequency Preset* Changes the frequency bank and the channel
Name* Enters a freely selectable name
Auto Lock Activates/deactivates the automatic lock mode
Advanced Calls up the extended menu “Advanced Menu
Exit Exits the operating menu and returns to the current standard display
Extended menu “Advanced Menu”
Tune Sets the transmission frequencies for the frequency banks “U1” to “U6
Special function: Sets a channel and a transmission frequency for the frequency banks
U1” to “U6”:
̈ Select this menu item and call it up by pressing the SET button (SK)/the multi-function
switch (SKM) until the channel selection appears.
Mute Mode (SK) Sets the mode for the MUTE switch
RF Power Adjusts the transmission power
Cable Emulation (SK) Emulates guitar cable lengths/guitar cable capacities
Pilot Tone* Activates/deactivates the pilot tone transmission
LCD Contrast Adjusts the contrast of the display panel
Reset Resets the bodypack transmitter/radio microphone
Software Revision Displays the current software revision
Exit Exits the extended menu “Advanced Menu” and returns to the main menu
* For information on the sychronization of transmitters with receivers, refer to page 21.