Sennheiser 500 Series Headphones User Manual


 
Putting the devices into operation
16
SKM 500 radio microphone
Inserting the batteries/accupack
For powering the radio microphone, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
̈ Unscrew the lower part of the radio microphone from the radio microphone’s body » by
turning it counterclockwise.
̈ Slide back the lower part of the radio microphone as far as it will go.
̈ Open the battery compartment cover Ƹ.
̈ Insert the batteries or the BA 2015 accupack as shown on the battery compartment
cover. Observe correct polarity when inserting the batteries/accupack.
̈ Close the battery compartment cover Ƹ.
̈ Push the battery compartment into the radio microphone’s body.
̈ Screw the lower part of the radio microphone back to the radio microphone’s body ».
Charging the accupack
To charge the radio microphone with the inserted BA 2015 accupack (optional accessory):
̈ Use the LA 2 charging adapter to insert the radio microphone into the L 2015 charger
(both the charger and the charging adapter are available as optional accessories).
Changing the microphone head
The microphone head is easy to change.
̈ Unscrew the microphone head.
»
When unscrewing the radio microphone during operation, the muting function is
automatically activated. “MUTE” appears on the display panel.
When screwing the lower part of the radio microphone back to the radio micro-
phone’s body, the muting is canceled.
Ƹ
Ƹ
³