Filter
Top Products
Putting the devices into operation
13
Connecting an amplifier/mixing console
The receiver’s ¼” (6.3 mm) jack socket ¸ and the XLR-3M socket ¹ are connected in parallel.
̈ Use a suitable cable to connect the amplifier and/or the mixing console to the ¼”
(6.3 mm) jack socket ¸ and/or the XLR-3M socket ¹.
̈ Via the operating menu, adjust the audio output level (“AF Out”) of the receiver to the
input of the amplifier or mixing console (see page 27). The audio output level is adjusted
via the operating menu and is common for both sockets.
Connecting receivers in a network
You can connect several receivers in a network. To do so, use the LAN socket ƹ. The receivers
are remote controlled via a PC running the supplied “Wireless Systems Manager” (WSM) soft-
ware. For information on network operation, refer to the instruction manual of the EM 500
receiver available on the ew G3 product page at www.sennheiser.com.
Connecting the mains unit
Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.
To connect the mains unit:
̈ Insert the yellow connector of the NT 2-3 mains unit ƽ into the yellow socketƻ of the
receiver.
̈ Pass the cable of the mains unit through the cable grip ƺ.
̈ Slide the supplied country adapter ƾ onto the mains unit ƽ.
̈ Plug the mains unit ƽ into a wall socket.
The STANDBY button is backlit in red.
¹¸
WSM
ƻ
ƺ
ƽ
ƾ