Filter
Top Products
Overview of the operating menus
26
Overview of the operating menus
EM 500
When one of the standard displays is shown on the display panel, you can get into the main
menu by pressing the jog dial ². The extended menu “Advanced Menu” and the submenus
can be accessed via the corresponding menu items.
For more detailed information on the operating menus, refer to the individual
instruction manuals of the devices. These instruction manuals can be down-
loaded from the respective product pages at www.sennheiser.com.
Squelch
Easy Setup
Frequency Preset
Name
AF Out
Equalizer
AutoLock
Advanced
Exit
Main menu
“Menu”
AF Peak
Low RF-Signal
RF Mute
TX Mute
RX Mute
Low Battery
Exit
“Warnings”
Reset List
Current List
Scan New List
Exit
“Easy Setup”
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Extended menu
“Advanced Menu”
SKM Settings
SK Settings
Exit
Sub-menu
“Sync Settings”
Sensitivity
Auto Lock
Mute Mode (SK)
RF Power
Cable Emulation (SK)
Exit
“SKM Settings/
SK Settings”
Display Function of the menu item
Main menu “Menu”
Squelch Adjusts the squelch threshold, adjustment range: 5 to 25 dBμV in 2-dB steps, can be
switched off
Special function (for servicing purposes only): With the jog dial
² set to the “5 dB”
setting, you switch the squelch off by turning the jog dial to the left and keeping it in this
position. If you then turn the jog dial to the right, you switch the squelch on again.
CAUTION!
Danger of hearing damage and material damage!
If you switch the squelch off or adjust the squelch threshold to a
very low value, loud hissing noise can occur in the receiver.
The hissing noise can be loud enough to cause hearing damage or
overload the loudspeakers of your system!
̈ Always make sure that the squelch is switched on (see above).
̈ Before adjusting the squelch threshold, set the volume of the
audio output level to the minimum.
̈ Never change the squelch threshold during a live transmission.