Filter
Top Products
Using the devices
20
To activate the RF signal:
SKM 500 radio microphone
To switch the radio microphone on (online operation):
To switch the radio microphone off:
̈ If necessary, deactivate the lock mode (see page 22).
To switch the radio microphone on and to deactivate the RF signal on switch-on (offline oper-
ation):
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈ Briefly press the ON/OFF button Ƹ.
“RF Mute Off” appears on the display panel.
̈ Press the SET button ¶.
The transmission icon ብ is displayed again.
̈ Briefly press the ON/OFF button ¹.
The radio microphone transmits an RF signal. The transmission icon ብ is
displayed.
The red ON LED ¾ lights up and the standard display “Frequency/Name”
appears on the display panel.
You can switch the radio microphone on and deactivate the RF signal on switch-on.
For more information, see below.
̈ Press the ON/OFF button ¹ until “OFF” appears on the display panel. The red
ON LED ¾ goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button ¹ will cancel your entry
(ESC function) and return you to the current standard display.
̈ Press the ON/OFF button ¹ until “RF Mute On?” appears on the display panel.
SET
SET
¹
¾
ON/OFF
ON/OFF
SET