Filter
Top Products
Putting the devices into operation
14
SK 500 bodypack transmitter
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
̈ Push the two catches ¸ in the direction of the arrows and open the battery compartment
cover µ.
̈ Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
̈ Close the battery compartment.
The battery compartment cover µ locks into place with an audible click.
Charging the accupack
To charge the BA 2015 accupack:
̈ Insert the bodypack transmitter into the L 2015 charger (optional accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser microphones and instru-
ments (e.g. guitars). DC powering of the condenser microphones is via the audio input.
̈ Use one of the recommended Sennheiser microphones or the optional CI 1 instrument
cable.
̈ Connect the 3.5 mm jack plug ƺ from the Sennheiser microphone or instrument cable to
the 3.5 mm jack socket MIC/LINE ³.
̈ Lock the 3.5 mm jack plug by screwing down the coupling ring ƻ of the cable.
̈ Via the operating menu, adjust the sensitivity of the microphone/line input.
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.
¸
µ
¸
³
ƻ
ƺ