Filter
Top Products
5
ENGLISH
Connections
CAUTION:
<
Switch off the power to all equipment before making connections.
<
Read the instructions of each component you intend to use with this unit.
<
Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal
interconnection cables together with the AC power cord.
ANALOG IN/OUT jacks
Analog 2-channel audio signal is input or output from these jacks. Connect these jacks to the
amplifier with RCA cables.
CD-WR880 Amplifier
ANALOG OUT q MD PLAY, TAPE PLAY, etc.
ANALOG IN q
MD REC, TAPE REC, etc.
Make sure to connect:
white plug q white jack (L: left channel)
red plug q
red jack (R: right channel)
DIGITAL IN terminal
To record digital audio signals, connect this terminal to the digital output terminal of a digital
device such as a CD player, MD deck, etc. with an optical digital cable.
< Keep the supplied cap to cover the terminal when it is not in use.
AC Power Cord
After all other connections are complete, connect the plug to the AC wall socket.
Be sure to connect the power cord to an AC outlet which supplies the correct voltage.
Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the
power cord.
C
B
A
REC PLAYDIGITAL OUT
RL RL
CD Player, MD Deck, etc. Amplifier
AC Outlet
AB
C