Sanyo CD-RW880 CD Player User Manual


 
13
ENGLISH
Each time the REPEAT button is pressed, the repeat mode is
changed as follows:
REPEAT ALL (Repeat All the Tracks)
Press the REPEAT button once during playback.
All the tracks of the disc will be played repeatedly.
REPEAT 1 (Repeat one track)
Press the REPEAT button twice during playback.
The track being played will be played repeatedly. If you press
the MUSIC SKIP button and select another track, the track
you selected will be played repeatedly.
It is also possible to select a track to be repeated in the stop
mode. Press the REPEAT button twice and then select the
track number by pressing the MUSIC SKIP button. Press the
PLAY button to start playback.
<
If one of the following buttons is pressed, repeat mode will
be cancelled:
OPEN/CLOSE, STANDBY/ON, POWER
<
Repeat playback works with finalized discs only.
Repeat Playback
REPEAT ALL REPEAT 1
(off)
To repeat a designated section
Please note that CD-R/CD-RW discs that haven't been
finalized cannot be used for A-B repeat.
1. Start playback and designate the point at which the A-B
repeat should start (point A) by pressing the A-B
button.
“REPEAT A-” blinks on the display.
2. When the point at which repeat playback should end
(point B) is reached, press the A-B button again.
The designated section will be played repeatedly.
< After designating point A, the SEARCH button can be used to
fast-forward or fast-backward to point B.
Note that the point B should be forward the point A. Do not
go back beyond the point A.
<
MUSIC SKIP buttons don’t work during A-B repeat playback.
<
If one of the following buttons is pressed, A-B repeat mode
will be canceled:
A-B, STOP, OPEN/CLOSE, STANDBY/ON, POWER
A-B Repeat