Sanyo CD-RW880 CD Player User Manual


 
23
ENGLISH
Specifications
< Design and specifications are subject to change without
notice.
<
Weight and dimensions are approximate.
<
Illustrations may differ slightly from production models.
Media type
CD-RW and CD-R for Digital audio (record and playback)
CD (playback only)
Frequency converter input sampling frequency
32 kHz, 48 kHz
Recording sampling frequency . . . . . . . . . . . . . . . . . 44.1 kHz
Frequency response. . . . . . . . . . . . . . . . . . . . 20 Hz to 20 kHz
(playback: ±1.5 dB, recording: ±1.5 dB)
Signal to noise ratio . . . . . . . . . . . . . . . . . . . 90 dB (playback)
90 dB (digital recording)
82 dB (analog recording)
Dynamic range . . . . . . . . . . . . . . . . . . . . . . . 86 dB (playback)
84 dB (recording)
Total Harmonic Distortion . . . . . . Less than 0.05% (playback)
Less than 0.05% (recording)
Wow & flutter . . . . . . . . . . . . . . . . . . . . . . . . . Unmeasurable
Audio Input Sensitivity/Impedance LINE: –6 dBV (0.5 V)/20 k
Output Level/Impedance . . . . . . . . LINE : –6 dBV (0.5 V)/1 k
Maximum output level . . . . . . . . . . . . . . . . LINE:+6dBV (2.0V)
Power requirements . . . . . . . . . . . . . . . . . . . . . . 120V, 60Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 W
Dimensions (W x H x D) . . . . . . . . . . . . . 435 x 100 x 295 mm
(17 1/8” x 3 15/16” x 11 5/8”)
Weight (Net) . . . . . . . . . . . . . . . . . . . . . . 4.5 kg (9 15/16 lbs)
Standard Accessories
RCA cable x 2
Optical digital cable x 1
Remote control unit x 1
Battery (AA, R6, SUM-3) x 2
Owner’s manual x 1
Warranty card x 1
Messages
Messages
BLANK 0:00
A blank CD-R/CD-RW disc is set on the tray.
CLOSE
Close the disc tray.
ERASE
Erase the last track of the CD-RW disc.
ERASE DISC
Erase all the tracks of the CD-RW disc.
FINALIZE
Finalize the disc.
FS 44_1K, FS 32K or FS 48K
The sampling frequency of the digital source
NO DISC
No readable disc has been loaded.
NOW OPC
Appears during OPC (Optimum Power Control). Wait a few
seconds.
OPEN
Open the tray.
- - - -:- -
The unit is reading the disc.
PMA WRITE
Writing the recorded memories on the disc.
(PMA: Program Memory Area)
READING
The unit is reading the disc. Wait a few seconds.
REFRESH
Refresh the CD-RW disc.
REPAIR
Repair the disc.
UNFINALIZE
Unfinalize the CD-RW disc.
Error Messages
DIN UNLOCK
A digital input source has been selected, but the source is not
connected or is not switched on.
READ ERROR
Something is wrong with the disc.
Press the OPNE/CLOSE button and change the disc.
DISC FULL
There is no space on the disc, or no more tracks are available.
NO TOC
The SHUFFLE or the PROGRAM button was pressed with an
unfinalized disc.
Programmed playback and shuffle playback works with
finalized discs only.
PGM FULL
32 tracks have been programmed. No more tracks can be
programmed.
TRAY ERROR
An error occurred within the unit.
Press the POWER switch to turn the unit off, wait a minute,
and turn it on again.