Filter
Top Products
17
ENGLISH
To stop recording
< Manual track division is possible regardless of the
AUTO/MANUAL setting.
<
A track cannot be less than four seconds in length. The
RECORD button will not work if it is pressed within four
seconds from the beginning of a track.
Press the PAUSE button (J
). “WAITING” briefly appears on
the display, and the recording is paused.
To restart recording, press the PLAY button (y
) or the PAUSE
button (J
).
<
You cannot restart recording while “WAITING” is displayed.
<
Remember that every time recording is paused or stopped, a
new track number will always be assigned. It is not possible to
record in two “stages” within one track.
Press the STOP button (H) to stop recording.
To suspend recording temporarily
(pause mode)
Sampling Rate Converter
This unit incorporates a sampling rate converter so that it can
record digital signals sampled at 48 kHz or 32 kHz by
converting the sampling frequency into 44.1 kHz.
Press the PLAY or the PAUSE button to start recording.
Play the source to be recorded.
When the playback of the source has been finished, press the
STOP button to stop recording.
< The STANDBY/ON button doesn’t work during recording.
7
6
It is possible to divide the recording into tracks while
recording.
While recording is taking place, press the RECORD button.
The current track number will be incremented by one.
Manual track division
To monitor the input signal
When there is no recordable disc in the unit, press the
RECORD button (when there is a recordable disc in the unit,
pressing the RECORD button will enter record pause mode).
The word MONITOR appears on the display to show that the
output signal is an echo of the input signals. The meters show
the current input level.
Exit the monitor mode by pressing the STOP button.
Input Monitoring