Filter
Top Products
Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment by reducing
the dynamic range of the audio signal.
1. Press the On/Off button to switch on your radio.
2. Press the Mode button as needed to select DAB mode.
3. Press the Menu button to enter the DAB menu list.
4. Rotate the Tuning/Select control until 'DRC' is highlighted on the
display.
5. Press the Tuning/Select control to enter the DRC adjustment mode.
The current DRC setting will be indicated with an asterisk.
6. Rotate the Tuning/Select control to highlight the required DRC setting
(the default is Off).
DRC Off - DRC is switched off, Broadcast DRC will be ignored.
DRC high - DRC is set as sent by broadcaster.
DRC low - DRC level is set to 1/2 that sent by broadcaster.
7. Press and release the Tuning/Select button to confi rm the setting.
Note: Not all DAB broadcasts use the DRC function. If the broadcast
does not provide DRC information, then the DRC setting in the radio will
have no effect.
4-7
1
2
3
47