Filter
Top Products
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on the radio. If the radio has been
used before the last used mode will be selected.
3. Press the Mode button as needed so that DAB mode is selected on
the display.
4. If this is the fi rst time that DAB mode is used a quick scan of the
UK Band III DAB channels will be carried out. The display will show
"Scanning".
If the radio has been used before the last used station will be
selected.
5. During the scanning process, as new stations are detected the station
counter will increase and stations will be added to the list of stations
which is stored in the radio. The bar graph indicates the progress of
the scan.
6. When scanning is completed the radio will tune to the fi rst station (in
numeric-alpha order 0....9...A...Z) unless it has previously been tuned
to a DAB station.
7. If the station list is still empty after the scan your radio will display
"Service not available".
8. If no stations are found it may be necessary to relocate your radio to
a position giving better reception.
41
3
2