Filter
Top Products
77
Disabling alarms
1. To disable a single alarm enter the alarm setup menu (see page 74) and
rotate the Tuning/Select control until the desired alarm is highlighted
on the display. Press the Tuning/Select control.
2. Rotate the Tuning/Select control until the 'Enable:' option is highlighted
on the display. Press the control.
3. Rotate the Tuning/Select control to highlight
'Off' and press the
control.
4. Rotate the Tuning/Select control until the
'Save' option is highlighted
on the display then press the control to save the new setting.
The chosen alarm will now be disabled.
Snooze timer
1. The buzzer or radio alarm can be silenced for 5 minutes by pressing the
Tuning/Select/Snooze control. Should you wish for a longer snooze
duration this can be extended. Pressing the control again while the
sound system is snoozed will set the available snooze time to 5, 10,
15 or 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown
next to the flashing alarm icon on the clock display.
3. In order to cancel the Snooze timer while the alarm is suspended,
press the On/Off button. The display will briefly show an 'Alarm Off'
message.
1-4
3
1