Filter
Top Products
DAB Radio
Using DAB mode for the first time
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on the sound system. If the sound
system has been used before the last used mode will be selected.
3. Press the
Mode button as needed so that DAB radio mode is selected
on the display.
4. If this is the first time that DAB mode is used a quick scan of the
Band III DAB channels used in the UK will be carried out. The display
will show
'Scanning'. (If the sound system has been used before the
last used station will be selected instead.)
During the scanning process, as new stations are detected the station
counter will increase and the stations will be added to the list which
is stored in the sound system. The bar graph indicates the progress
of the scan.
5. When scanning is completed the radio will list the stations found (in
numeric-alpha order 0....9...A...Z), unless it has previously been tuned
to a DAB station.
Rotate the Tuning/Select control to scroll through the list of available
DAB radio stations.
Press the Tuning/Select control to select the highlighted station. The
display may show 'Connecting...' while the radio re-tunes.
Use the Volume
control to set the sound level as needed.
6. If the station list is still empty after the scan the display will show
'Service not available'. If no stations are found it may be necessary
to relocate your sound system to a position giving better reception.
55
3
2
5
5