Filter
Top Products
Finding new DAB radio stations
Should you wish to use your sound system for DAB reception in a new
location, or if no stations were detected during the initial scan, you can
follow this procedure to allow your sound system to find out which DAB
radio stations are available.
1. Ensure that the telescopic antenna is extended, and then press the
Mode button as needed to select DAB radio mode.
2. Once in DAB mode press the
Menu button.
3. Rotate the Tuning/Select control until 'Local scan' is highlighted on
the display.
4. Press the Tuning/Select control to initiate the scan. The display
will show
'Scanning' and your radio will perform a scan of the DAB
frequencies used in the UK. As new stations are found the station
counter will increase and stations will be added to the list. The bar
graph indicates the progress of the scan.
5. To carry out a full scan of the entire Band III DAB frequencies rotate the
Tuning/Select
control until 'Full scan' is highlighted on the display.
6. Press the Tuning/Select control to initiate the scan. The display will
show 'Scanning'. As new stations are found the station counter on the
right hand side of the display will increase and stations will be added
to the list. The bar graph indicates the progress of the scan.
Due to the larger number of DAB channels scanned, the full scan will
take longer than the local scan.
59
3-6
1
2