Sagem 700 Radio User Manual


 
55
MISCELLANEOUS SETUP FUNCTIONS
5.6. CHECK FIRMWARE VERSION
5.7. SOFTWARE UPDATION
This function will allow you to proceed the software updating by mean of an USB2 key
containing the programm file.
You can visit the supplier's website to check whether there is any new firmware for this device
to upgrade it. If any new firmware has been released, download it and follow the upgrade
procedure below to upgrade the firmware on your device.
Upgrading the Firmware on your Device:
Step 1: Uncompress the new F/W file (e.g. the file "20070315_ShrekW_R102C7.zip")
and copy the uncompressed file "ShrekW.BIN" to the ROOT folder of a USB key
or USB MP3 player.
(Note: DO NOT rename it!, Otherwise the IP Radio will not be able to find the
new F/W)
Step 2: Turn on the IP Radio and then plug the USB key into the front USB port of the
IP Radio.
Step 3: Operate the IP Radio to access the F/W upgrade menu ("Setup\Advanced
Setup\ F/W Upgrade (thru. USB)"), then press the "OK" button to activate the
F/W upgrade function.
The messages "F/W Upgrading", and "Don't Power Off!!" messages should be
displayed. After few seconds, once the upgrade procedure has been
completed, the device will reboot automatically.
¸
¸