Filter
Top Products
23
INSTALLATION
2.1.4. Configuration as a Wireless Access Point (AP)
If you wish to extend your wireless network coverage range, you need to add new access
points to specific locations in your home. This will enable other wireless notebook PCs and
network devices to access the extended wireless network. The IP Radio device can also be
configured as a wireless AP. With this feature, you can easily extend your wireless coverage
without having to purchase another AP.
To configure the IP Radio device as an AP, you need to setup the device manually via the MMI
menu "Setup/Advanced Setup/Configure Network/AP mode". You then need to enter the IP
address, the SSID, the channel number and the AP encryption. Once these settings have been
established, the device will automatically reboot and function as an AP.
Manually set to the Wireless AP Mode:
Manually set to the Wired Client Mode (continued)
8 The device is now
in wired client
mode.
9 The device is
already connected
to your network
Screen on the
right
Screen shot Next screen Comment
1 "OK" button Initial screen
2 "" button
(4 times)
"" button
or "OK" button