Filter
Top Products
Installation
20 Lightstyle™ Series LS-100d Installation/Operation Manual
PRE
L
IMINAR
Y
RS-232 Connection: Connect the Display Control output from the DHD Controller to
the RS-232 input on the LS-100d. Use a standard, modular telephone cable with RJ11
plugs at both ends. On the LS-100d end, use the provided RJ11-to-DB9 null-modem
adapter. This adapter is wired as shown in Figure 3-2.
Figure 3-2. RS-232 Connection from the DHD Controller to the LS-100d
4
3
RCV DATA
2
3
XMT DATA
XMT DATA
RCV DATA
2
5
SIG GND
NO CONNECTION
1, 5, 6
1, 4, 6,
7, 8, 9
To/From
DHD
Controller
6-position
RJ-11 Male
DB-9 Female
6
1
1
6
RS-232
RS-232