Filter
Top Products
Controls and Functions
Lightstyle™ Series LS-100d Installation/Operation Manual 7
PRE
L
IMINAR
Y
7. ERROR LED
• Solid orange = Error that requires servicing (fan fail, Power-on self-test fail etc.)
• Off = Projector functioning normally
8. TEMP LED
• Solid red = Over temperature, user intervention (clear vents, turn on AC) may fix
problem
• Off = Projector functioning normally
2.3
DHD Controller Front
Panel
Figure 2-3 shows the controls and indicators on the DHD Controller front panel; the
paragraphs that follow describe them.
Figure 2-3. DHD Controller Front Panel
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. IR SENSOR
Receives IR commands from the remote control.
3. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the connected display device model, current
source, input resolution and aspect ratio/screen.
4. ON/STANDBY BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
5. LEFT BUTTON
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu
is present on-screen, the LEFT button toggles through the different sources, in this
order:
HDMI 4 - HDMI 3 - HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component -
Composite 3 - Composite 2 - Composite 1
r
a
t
i
o
r
a
t
i
o
i
n
p
u
t
standby
m
e
n
u
i
n
p
u
t
e
n
t
e
r
4
HDMI 1
16:9/1 1080i/60
3
1
91011
654 87
2
LS-100d