Filter
Top Products
37
Troubleshooting
Problems at Startup with Guitar Tracks 4
Problem Points to check Action
Can’t start up
Could numerous applications be
running?
It may be that Guitar Tracks 4 cannot start up because there is insufficient memory.
Close other applications before you start up Guitar Tracks 4. If an error still appears, try
restarting Windows.
Could memory-resident programs
be running?
Memory-resident programs such as anti-virus software may prevent Guitar Tracks 4
from running correctly. Try closing such software before starting Guitar Tracks 4.
“Audio Driver Error” is
displayed
Could you be using other music
application software?
If Media Player or any other application that has audio playback capability is running,
Guitar Tracks 4 won’t be able to use the audio driver, and an error appears when Guitar
Tracks 4 is started. Close the audio playback application, and then start Guitar Tracks 4
again.
Are the audio driver settings
appropriate?
If an audio driver not being used by Guitar Tracks 4 is installed, try either disabling that
driver or disconnecting the corresponding audio interface from your computer.
Try changing the “Audio Driver Settings” (p. 24).
The VS-20's knob
positions do not match
the parameter values in
Guitar Tracks 4
When you start up Guitar Tracks 4,
the parameters will be at their fixed
values, regardless of the physical
positions of the SENS knob, MIDI
BACKING knob, DAW OUTPUT
knob, DIRECT MONITOR knob, and
OUTPUT LEVEL knob, so the
parameters will not match the state
of the VS-20's panel.
In addition, INPUT SELECT will
automatically be set to GUITAR/
BASS.
Adjust the knobs once again.
VS-20_e.book 37 ページ ２０１０年１月１８日 月曜日 午前９時８分