Filter
Top Products
DAB Radio
Using DAB mode for the rst time
1. Carefully extend the telescopic aerial.
2. Press and hold the On/Off control to switch on the radio. If the radio
has been used before the last used mode will be selected.
3. Press the Mode button as needed so that DAB radio mode is selected
on the display.
4. If this is the rst time that DAB mode is used a quick scan of the Band III
DAB channels will be carried out. The display will show 'Scanning'. (If
the radio has been used before the last used station will be selected
instead.)
During the scanning process, as new stations are detected the station
counter will increase and the stations will be added to the list which
is stored in the radio. The bar graph indicates the progress of the
scan.
5. When scanning is completed the radio will list the stations found (in
numeric-alpha order 0....9...A...Z), unless it has previously been tuned
to a DAB station.
Rotate the Tuning/Select control to scroll through the list of available
DAB radio stations.
Press the Tuning/Select control to select the highlighted station. The
display may show 'Connecting...' while the radio re-tunes.
Use the Volume control to set the sound level as needed.
6. If the station list is still empty after the scan the display will show
'Service not available'. If no stations are found it may be necessary
to relocate your radio to a position giving better reception.
57
3
5
2
5