Filter
Top Products
Presetting stations in DAB and FM modes
There are 5 memory presets each for DAB and FM radio. They are used
in the same way for each operating mode.
1. Press the On/Off button to switch on your radio.
2. Tune to the required radio station as previously described.
3. To store the station as a preset, press and hold the required Preset
button (1 - 5) until the display shows 'Preset stored'. The station will
be stored under the chosen preset button. Repeat this procedure as
needed for the remaining presets.
4. Stations which are already stored in the presets may be over written
by following the above procedure.
Note: The radio station presets are retained in memory when the radio is
switched off and disconnected from the mains supply.
Recalling a preset in DAB and FM modes
1. Press the On/Off button to switch on your radio.
2. Select the required operating mode using the Mode button.
3. Momentarily press the required Preset button. Your radio will then
tune to the station stored in the selected preset memory. The chosen
preset number is also shown in the lower area of the radio display,
e.g. 'P2'.
71
2
1
3
3