Roberts Radio 205 CD Player User Manual


 
If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)
Music Player .
42
2
Playing les from USB memory devices
1. Carefully insert the USB memory device into the USB slot. Press the On
button to switch on the radio.
The radio may detect that the memory has been connected, in which case
it will ask whether you wish to open the folder view of the memory contents.
Press the Tuning/Select control to select 'Yes' and skip to step 4 below.
If the USB memory was not automatically detected, proceed as follows.
2. To select USB playback mode press the Mode button as needed until the
Music Player mode is selected.
3. Rotate the Tuning/Select control until 'USB playback' is highlighted on the
display and press the control. The radio will now list the content stored on
the USB memory device. If there are many les or folders this may take a
few seconds.
4. Rotate the Tuning/Select control to highlight the required folder and press
the control to enter the current folder. The list of tracks in the current folder
will be displayed.
Alternatively, if you have nested folders (such as album folders within an
artist folder) then you will simply step to the next folder level.
5. Rotate the Tuning/Select control to select the track and press the control
to begin playing from the highlighted track. All les in the current folder will
then be played in turn.
Files are played in the order in which they exist in the ling system of the
USB memory (they are not sorted by le name or track number).
6. Controlling playback from the USB memory device including Shufe
and Repeat functions is explained on pages 38 and 39. The shufe play
function may only be used if the current selection comprises fewer than 500
tracks.
3-5