Filter
Top Products
14
Immediately after installing or connecting
power to the unit, it should be initialized.
Lower the detachable front panel. Behind the
front panel, to the left of the connector, is a
small hole with the reset switch in it. With a
ball-point pen or other pointed object, press
the RESET switch to initialize the unit.
1. PWR/BACK
Press the PWR/BACK button to turn the
unit ON. The unit automatically remembers
its last operation mode and will automati-
cally switch to display that mode.
Press and hold the button for 1 second or
longer to turn off the unit.
2. MODE
1.Press the MODE button to change the
mode. Each time you press the Mode but-
ton, the Mode will change.
* If there is no DVD disc in the unit it will not
change to DVD unit.
3. Volume
Turning the Volume knob to the right In-
creases the volume.
Turning the volume knob to the left de-
creases the volume.
4. EQ
This unit has 4 pre-set equalizer settings
stored in memory.
To select the one.
* The factory default setting is “OFF”.
Each time you rotate the Volume knob,
the pre-set equalizer setting changes in the
following order:
MENUS
To access these menus press the vol-
ume knob on the faceplate or the MENU
button on the remote control
1. Picture Menu
In playback and AV mode, press the Vol-
ume knob to access the PICTURE menu,
there are 4 adjustable video characteristics
stored in memory, they’re accessed in the
following the order: BRIGHTNESS/CON-
TRAST/COLOR/HUE. Press and rotate the
Volume knob to select the setting you wish
to adjust.
2. Audio Menu
Press the Volume knob to access the AU-
DIO menu, then select the item to adjust,
each time you press the Volume knob, the
item selectedchanges as following order:
Turn the Volume knob to adjust the sound
characteristic selected.
3. Expert Menu
Press the Volume knob to access the EX-
PERT menu, rotate the Volume knob to gh-
light the function you wish to adjust. Press
the volume knob to select the highlighted
function.
A. DX/LOC
In Radio mode select DX/LOC on the EX-
PERT menu, then rotate the Volume knob to
choose between DX or LOC. Choose DX to
listen to a distant, weaker signal, or choose
LOC to listen to a stronger local signal.
B. ST/MONO
In Radio mode select ST/MONO on the EX-
PERT menu, then rotate the Volume knob
to choose between ST or MONO. Choosing
ST will enable to the radio to play in stereo
mode. MONO will enable the radio to play
in mono mode. When the sound quality is
poor because the signal strength is weak,
Basic Operations
RESET SWITCH
TUNER----DVD----USB----SD----AV
OFF--CLASSIC--POP--ROCK--JAZZ
BASS--TREBLE--EQ--BALANCE--FADER